This will be a comprehensive guide as to what has been done to my BMW M4 GT Edition. This guide will be split into 3 Stages from preventative modifications to making the most out of your S55 engine (reliably).
The BMW S55 engine is found in 3 different BMW F8x models, the F80 BMW M3, the F82 BMW M4, and the F87 BMW M2 Competition.
Links included to parts are referral links that don’t cost you anything however they do help support the channel and content creation therefore do use the links if you purchase any of the items here.
Preventative Modifications
The S55 is a robust engine however there are a few areas that fall short that have been known to cause catastrophic failure. BMW is known to use plastic parts for some engine components which tend to give way with continuous exposure to heat. For the S55 these parts include the Chargepipes and J Pipe, chargepipes being at the ‘hot’ side of the engine while the J pipe is at the ‘cold’ side of the engine. These parts tend to crack and leak boost when they give way. However, there are no risks to engine damage other than reduced power and a drivetrain error. It’s often that owners change to either aluminum or silicone versions to prevent failure. This can be purchased at VRSF with the links below.
VRSF Chargepipes: Purchase Here

VRSF J Pipe: Purchase Here

I however decided to opt for the Burger Motorsport J Pipe as it comes with a TurboSmart BOV which adds a little more sound to the S55 driving experience.
BMS J Pipe + BOV: Purchase Here

Apart from the charge pipes, the crank hub is known to slip on these engines which could lead to catastrophic engine failure.
The S55 comes with Bosch Spark Plug from the factory. However, these aren’t that strong and tend to wear out when exposed to spirited driving or tuned cars. NGK offers better spark plugs that last longer however be sure to have them gapped according to your tune and fuel of choice. I’m on NGK 97506 2-Step Colder Plug (gapped at 0.22) for Hybrid Turbos on RON 100 fuel.
Crankhub -
Stage 1 Modifications
1. Off The Shelf Tunes ( OTS Tunes )
One of the benefits of the BMW platform is its ability to get remapped in as little as 20 minutes. Software like Bootmod3 and MHD Tuning allows us to ‘download’ horsepower and flash them with our laptops or mobile phones.
With a BM3 OTS Tune (Stage 1 93 Octane), I went from 400hp to 500hp with no bolt-ons or other modifications, just a tune. Bootmod3 also comes with a free GTS Transmission Tune which allows you to increase the factory transmission’s clamping force and eliminate the ‘Kangaroo Jump’ that the transmission tends to do when in first gear.
Would definitely recommend an OTS Stage 2 tune for anyone looking at making more power from their S55
BootMod3: Purchase Here
MHD Tuning: Purchase Here
2. Secondary Catalytic Convertor Delete
Another cheap and common mod that is done to increase horsepower is removing the factory secondary catalytic converters. This frees up airflow and increases horsepower by up to 20hp and is fairly cheap and fast to do. This also increases the volume of your S55 exhaust without having to deal with the potent exhaust fumes that come about when switching to Catless Downpipes.
Stage 2 Modifications
Catless Downpipes

The factory-catted downpipes are restrictive and don’t allow for much flow however they do a good job at keeping sound levels low. Installing catless downpipes onto your S55 allows you to flash a higher boost Stage 2 tune hence gaining around 20whp. The Catless Downpipes supplied by VRSF do a good job and are built well. They also come in an optional Ceraoke Coating which can be added on for a fee. You may purchase the VRSF Catless Downpipes here.
2. Bootmod3 OTS Tune
Similar to Stage 1, Bootmod3 offers Stage 2 OTS tunes that can be flashed to accommodate the catless downpipes and increase boost accordingly. Stage 2 roughly makes around 30hp when accommodated with a Stage 2 tune and catless downpipes.
BootMod3: Purchase Here
3. XHP Transmission Tune
Stage 3 Modifications
- Hybrid Turbos
VRSF Charge Air Cooler: Purchase Here

With the addition of more power to your S55, it’s important to be able to maintain cool and consistent temperatures. The factory Charge Air Cooler is robust and does a great job at maintaining low temperatures however they are prone to leaking due to its plastic components. There are a large number of companies that produce direct replacements for the factory Charge Air Cooler however I opted for the VRSF Charge Air Cooler as it allowed me to reduce the chances of leaks as well as keep my temperatures cool due to its 62% higher capacity than the OEM intercooler.
VRSF Heat Exchanger: Purchase Here

In addition to the Charge Air Cooler, the factory Heat Exchanger falls short of being able to keep temperatures consistent especially when making more power. The VRSF Heat Exchanger is a good piece that increases the Coolant Volume Capacity and Surface Area to keep temperatures low and consistent.
Turbo Inlets

The FTP Turbo Inlets increase the size of the factory turbo inlets as well as replace the factory plastic inlets with an aluminum option. The increased inlet size reduces intake resistance and increases airflow to the turbos.
These inlets however are hard to install and I would only recommend getting these when you are upgrading to larger / hybrid turbos. I also noticed the turbo flutter and turbo sounds to be more prominent after installing these.
FTP Turbo Inlets: Purchase Here
Air Intake
An air intake for your BMW S55 could be a good choice if you’re looking at adding turbo spooling and swooshing sounds to your driving experience. While there are no real power benefits to changing your intake kit, the sound difference definitely makes it worth it.
VR Speed Factory (VRSF) offers two options for air intakes. Their High Flow Intakes retain the factory position of the air intakes and their Front Mounted Intakes move the intakes to where the kidney grills sit. Both are good options however you will have to be a little more cautious around water when using the front-mounted intakes.
VRSF High Flow Intakes: Purchase Here

VRSF Front Mounted Intakes: Purchase Here

Exhaust System
The factory exhaust note of the S55 engine is known to be raspy and have a tin-can character. This is due to the unequal length of the downpipes which cause the horrible rasp.
There are 2 ways owners can overcome this.

The first is the cost-effective option which is running a Single Midpipe. The single mid-pipe acts as an enormous resonator that reduces the rasp significantly. While it still retains the distinct S55 sound, to me it was just not a perfected sound. Would recommend the single mid-pipe for those looking at retaining a small percentage of rasp. Companies like VR Speed Factory offer the single mid-pipe that may be purchased here
The second option is running an Equal-Length setup. My BMW M4 is running HydraTech’s Complete System which is the first complete exhaust setup that features the equal length pipes. This significantly enhanced the sound of my BMW M4 and at certain RPM ranges has the characteristics of a Flat 6 Porsche Engine. They offer the exhaust system in both Stainless Steel and Titanium.
Tyres
- Sport Contact7, tyre size 295 - 305
Brakes
Suspension
Other Modifications:
Zunsport Grills - reduce stone damage
PSM Dynamics Carbon Side Skirt
PSM Dynamics Carbon Rear Diffuser
OEM M4 GTS Carbon Spoiler
DarwinPro Aero Carbon Bonnet with Glass Window
VARIS Carbon Front Lip
XPEL Window Tint
Alcantara Wrap
Ceramic Coating by SF Autospa
